Using the RadBeacon app for iOS, Android or OS X, scan for configurable beacons and follow the instructions for selecting and configuring your beacon. Radius Networks RadBeacon Dot - Proximity Beacon with Eddystone, iBeacon and AltBeacon. CONFIGURABLE - Beacon is discoverable and connectable by a valid configuration app like RadBeacon for iOS, Android or OS X. This indicates that the beacon has transitioned to the CONFIGURABLE mode. You can set the beacon into various operating modes by using the silicone cap button.lick the button once and you should see a SINGLE GREEN FLASH. Now that you are a beacon button expert, click the button again so that you see a SINGLE GREEN FLASHand set your beacon back into ON mode.įrom the ON mode, press and hold the button for approximately 5 seconds, or until you see a DOUBLE GREEN FLASH. This indicates that you are back in OFF mode. This indicates that the beacon has transitioned to the ON mode.Ĭlick the button once again and you should see a SINGLE RED FLASH. ![]() CONFIGURABLE - Beacon is discoverable and connectable by a valid configuration app like RadBeacon for iOS, Android or OS X.Ĭlick the button once and you should see a SINGLE GREEN FLASH.ON - Proximity advertisements are being transmitted.OFF - No advertisements are being transmitted.Tap the beacon that was found and name it to the Room or Location you plan to use. At this point you may want to also block notifications from this app. With the app open, and the beacon on, hit scan. Do a scan to find your Beacon, press the play button, you’ll want to stop this after your beacons are seen. The button is used to set the RadBeacon Dot beacon into one of several operating modes. Android Settings >Apps >Permissions, enable Locations.
0 Comments
Leave a Reply. |